B Type RCD

  • 100A AC 100mA 4pole 10KA Type B RCD DC 6mA EV RCCB Circuit Breaker

    100A AC 100mA 4pole 10KA Type B RCD DC 6mA EV RCCB Circuit Breaker

    RCD Type B 100A 100mA DC 6mA and RCCB Type B 100A 30mA DC 6mA  Type B RCD 100A 4Pole 2Pole 300mA for EV Charger Station

    Rated Current: 16A, 25A,32A ,40A, 63A, 80A 100A,Poles: 2Pole (1P+N) , 4Pole (3P+N),Rated voltage: 2Pole: 230V/240V , 4Pole: 400V/415V, Rated frequency : 50/60Hz , Rated residual operation current:30mA ,100mA ,300mA, Short-circuit current Inc= I c 10000A

     

     

  • 2P 4Pole 63A 500mA B Type RCD 10KA Type B RCCB for 22KW EV Wallbox

    2P 4Pole 63A 500mA B Type RCD 10KA Type B RCCB for 22KW EV Wallbox

    RCD Type B 40A 30mA DC 6mA and RCCB Type B 63A 30mA DC 6mA  Type B RCD 40A 4Pole 2Pole 30mA for EV Charger Station.  Tripping is ensured for sinusoidal AC residual currents pulsed DC residual currents,alternating residual sinusoidal currents up to 1000Hz,pulsating direct residual currents and for smooth direct residual currents,whether applied suddenly or increasing slowly.

     

  • 2P 40A 63A 80A TypeB RCCB 30mA DC 6mA Type B RCD for Wallbox

    2P 40A 63A 80A TypeB RCCB 30mA DC 6mA Type B RCD for Wallbox

    RCD Type B 100A 100mA DC 6mA and RCCB Type B 100A 30mA DC 6mA  Type B RCD 100A 4Pole 2Pole 300mA for EV Charger Station 2P 40A 63A 80A TypeB RCCB 30mA DC 6mA Type B RCD for Wallbox

     

     

  • 4P 63A 80A 30mA RCCB Residual Current Device Circuit Breaker RCD

    4P 63A 80A 30mA RCCB Residual Current Device Circuit Breaker RCD

    Type B RCCBs, in addition to normal AC, can detect high frequency AC and pure DC earth leakage currents. Reducing the risk of fire and/or electrocution through automatic disconnection of the electrical supply relies on the selection of the correct type of RCCB.Provides protection against earth fault/leakage current and function of isolation. High short-circuit current withstand capacity. Applicable to terminal and pin/fork type busbar connection. Equipped with finger protected connection terminals. Automatically disconnect the circuit when earth fault/leakage current occurs and exceeds the rated sensitivity. Independent of power supply and line voltage, and free from external interference, voltage fluctuation.